Skip to main content
Description

Function :

These switches do not require any physical contact for their operation. They are capable of enabling or disabling an electronic circuit when any metallic object is brought close to their sensing face


  Non-contact operation coupled with high precision & fast operation.
  High Reliability.
  High Repeat Accuracy and High Speed Operation.
  Position / Alignment Indicator (LED Indication).
  Switches suitable for AC or DC control supply.
  Short Circuit and Reverse Polarity Protection available for DC type only.
  Standard cable length available is 2 meter.
  Block type enclosure with Glass Filled Nylon material.
  Dust and Water tight to IP-67.
  Mounting dimensions of these switches are same as that of small Limit Switch.

Optional Features

  Extra cable length available.

Types : 1) AC
2) DC
Supply Voltage : 1) AC : 110V, 50Hz, or 230V, 50Hz or 90 to 250V,50 Hz
2) DC: 8 to 30V
Output : 1) AC: Thyristor
2) DC: PNP or NPN Transistor
Protection : Reverse Polarity and Short Circuit Protection for DC type only.
Mode of Operation : Normally Open (NO) or Normally Closed (NC)
Mode of Sensing : Flush
Sensing Face : Front or Top or Right or Left. (Right or Left side sensing mode is viewed from the cable end)
Nominal Sensing Distance : Approx. 15 mm
Repeatability : Less than or equal to 7 to 8% of Sn
Ambient Temp. : Upto 60°C
Cable : 2 meter PVC cable (standard). Extra length available on request
Enclosure for BLM : Block type with Glass Filled Nylon Material, IP-67 grade

Wide spread usage from numerically controlled machine tools with very close tolerances to Special Purpose Machines / Equipments with wide tolerances, for Motion Detection (Linear as well as Rotating), Limit Sensing, Counting etc.